The lever’s were sanded down and repainted. And they have New OEM Johndeere grips installed on the lever’s. Will Fit a Z830A Johndeere Zero turn mower and others to. Left lever part number is TCA17080 and Right lever part number is TCA17079.

NOT FOR SALE TO CALIFORNIA. NOTICE: If your engine model number starts with 44, it indicates a 724cc displacement. This means both your old engine and our replacement engine share the same displacement of 724cc. Our 24 gross HP engine provides sufficient power to replace your old engine. Briggs and Stratton Engine. 24.0 Gross HP. 12 Volt Electric Start. Crankshaft drilled/tapped 7/16-20 crankshaft, ready for bolt. ADVANCED DEBRIS MANAGEMENT for superior protection. Full Pressure Lubrication System with SPIN-ON oil filter to minimize wear. Dynamically Balanced Crankshaft for smooth operation. The following is for mower with a separate choke cable: Your mower may have a separate cable to connect to the choke device of your engine. Our engine has a Choke-a-matic feature. What this means is that the choke and throttle device connect to the same cable. If you push the throttle lever all the way up, it will choke the engine. So you will have to mark on your throttle lever where is the maximum point. If you pass that point, you will choke the engine. We think you may be able to transfer the choking device/control from your old engine to the new one or you can always get a combined choke-throttle lever with cable from a local mower shop that fits your mower. Consumer or Residential use. Commercial or Rental use. These numbers can be found on a plate of your engine. We have a lot of engines available. Have not heard from us. If the 24 hour period has passed and you have not heard anything from us, PLEASE try one more time. There might be some problems preventing your message from getting to us. Please leave us a message if the line is busy or nobody answers. It is also easier for us to contact you if there is any problem, providing we have all the correct information. VERY IMPORTANT: Engine(s) may or may not be filled with oil. PLEASE check your engine oil level and add oil as needed before using. We will not do it. Please look at the return condition we set on the top of this page. Please remember, if you send a request to look for an engine, it is our courtesy and pleasure to research on your engine’s fitness and specification for you. We use our best knowledge and experiences to answer all your questions. However, we are not responsible for your engine’s fitness, functionality or merchantability. It is customer’s job to assure that the engine ordered will work and fit for their specific application. WARNING: WORKING WITH ENGINES or POWER TOOLS SUCH AS SAWS, GRINDERS, DRILLS, CHAIN SAWS, AND THE LIKE, PRODUCE A POTENTIAL RISK TO THE USER. CARE AND CAUTION AT ALL TIMES SHOULD BE EXERCISED BY THE USER TO AVOID POSSIBLE LOSS OF PROPERTY OR PERSONAL INJURY OR DEATH.