WE ARE THE DISTRIBUTOR OF THE”GEEZER BAR tm, THE ONLY full width, front mounted hand hold. Bar that allows our Seniors, maximum stability both to enter and exit your Zero Turn mower by having both. Hands on the bar until your feet are fully planted on the grass! NOTE: If you are having concerns as to arm, knee or leg. Strength when trying to unseat yourself using the steering handles or armrests, DO NOT order this handles as it is not. Designed for you to lean forward and use our handle to do a lateral pull! As it’s primary job is to do what a stair rail does. Help you maintain your balance! Note: If unsure of handle fit…. Measure the Centerline distance from top hole on the right side floor plate to the left side 3/8″ bolt holes and should be approximately 19-5/8 “.

WE ARE THE DISTRIBUTOR OF THE”GEEZER BAR tm, THE ONLY full width, front mounted hand hold. Bar that allows our Seniors, maximum stability both to enter and exit your Zero Turn mower by having both. Hands on the bar until your feet are fully planted on the grass! NOTE: If you are having concerns as to arm, knee or leg. Strength when trying to unseat yourself using the steering handles or armrests, DO NOT order this handles as it is not. Designed for you to lean forward and use our handle to do a lateral pull! As it’s primary job is to do what a stair rail does. Help you maintain your balance!

We are the distributor of the “GEEZER BAR” tm, THE ONLY FULL WIDTH FRONT MOUNTED. HANDLE that helps maintain SENIORS BALANCE when entering and exiting your zero turn. Mower by allowing you to have both hands on the bar until you have completely cleared the. Mower and have both feet firmly on the ground! NOTE: If you are unable to unseat yourself by pulling up using either the armrests, (if equipped), or. The steering handles due to lack of arm, leg or knee strength, do NOT Order this handle, if you have. To lean forward and attempt to do a lateral pull on the handle as it is NOT designed for that! The handle has (2) predrilled holes with a dimension of 12-1/8 Center Line to Center line apart. With stainless hardware provided. The handle measures 20 H. X 1, 14 ga.

We are offering a Senior “Helper” Handhold bar that fits 19 models of the CUB Cadet Model Zero Turn Mowers along with many models. Of the MTD, WHITE, and TROYBILT which are all built by MTD. This handle is designed to fit all of these units 1st. Photo that use the Floorplate or sometimes referred to as a “bracket” with the part #02002960 -xxx. The xxx indicates the color which is of no importance, since all the handles are in our standard black powder coat. The CC series as shown in the 2nd. Photo use this floorplate and all the other brands need to be checked in your parts book as to the part number of the floorplate or call your Dealer to confirm a fit. The other pics will show the handhold bar that mounts on the floor plate. Temporarily showing a Deere since no mower was available locally to mount on as a Model. This handle mounts in 30 minutes or less using predrilled (2)-5/16″ holes in the floorplate and need (2)-1/4″ holes drilled on the front side of the floorplate, (picture 3) to attach Stainless Steel. Bolts and serrated locknuts, (furnished). Flat Rate which is incorrect as to box size and will not accept order due to needing corrected!!

We are offering a custom built Senior Handhold “Helper” Bar to enable our SENIORS an easier method of entering and exiting your John Deere. This bar currently fits 2019 & 2020-Models- Z335E-Z345M, Z345R-Z355R-& Z375R. This bar is designed to mount in 20 minutes or less requiring no. Drilling or welding using predrilled holes and requires (2) -7/16 straight box end wrenches. (Hardware furnished) We will be adding nearly all other. Brands as time passes. We also have a unit available that fits MTD. White ZT 42 & 50, Cub Cadet 2005 Series and up. Also on our E bay site. If your mower has a grass bagger this handle won’t fit as the front counterweight uses the same. Holes as our handhold bar! This is not an OEM part and neither approved nor Disapproved by the Mfr. Now Powder coated for added dur. The item “Senior Handhold Helper Bar for John Deere Zero Turn Mowers” is in sale since Monday, January 25, 2021. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Lawn Mowers, Parts & Accessories\Lawn Mower Parts”. The seller is “bigais” and is located in Etters, Pennsylvania. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Item Height: 19.5 in
• Item Width: 20.5 in
• Material: Alloy Steel
• Type: Bracket
• Number in Pack: 1
• Color: Yellow Now Powder Coated
• MPN: DL-1
• Item Weight: 7 lb 5oz.
• Brand: Unbranded
• Item Diameter: 1 in